The Tactical Takedown (TTD) Pistol Grip Nerf Mod for the Nerf Rival Takedown provides improved ergonomics to make priming and firing much easier when using heavier spring loads.
Please note that you will need an allan key to remove the screws that hold the end cap in place.
Colored handle scales are available to match the aesthetics of the LTD Valour Edition Takedown Pump Grip:
Stay tuned to my YouTube channel for an install video of this nerf mod kit!
This listing is for one 3d printed Tactical Takedown Pistol Grip and includes Buffer Tube Delete for the Nerf Rival Takedown. All parts for this listing is shown on the second picture and all required hardware for installation.
This kit does not include the Nerf Rival Takedown Blaster, LTD VE Pump Grip, HIR Rack, rear iron sight, dart racks, TTD Buffer Tube Stock Core, Breacher Stock, QD sling, Sling Mount and Picatinny Rail.
The pistol grip, stock and priming handle have been tested with a Pro-RX spring from Turf Blaster Springs.
This is an intermediate nerf mod that will require some trimming of the shell. It is possible to revert your blaster back to stock the stock components. There are four retaining tabs that hold the handle shell to the main body, these will need to be cut. There are two tabs on the bottom part of the trigger that will need to be cut. On the upper rear portion of the red shell where it mates to the top of the pistol grip, part of it may need to be trimmed to allow for a flush fit.
All parts are 3d printed in PLA filament in the color of your choosing. Do not leave the parts outside or in hot environments!
Message me if you have any questions or would like to request a custom color!
Shipping from Canada
Estimated shipping times
- North America : 7 - 10 business days
- Europe : 8 - 22 business days
- Australia, New Zealand and Oceania : 12 - 22 business days
- Asia Pacific : 12 - 22 business days
I'll do my best to meet these shipping estimates, but can't guarantee them. Actual delivery time will depend on the shipping method you choose.
Customs and import taxes
Buyers are responsible for any customs and import taxes that may apply. I'm not responsible for delays due to customs.
Returns & Exchanges
I gladly accept returns and cancellations
Just contact me within: 5 days of delivery
Ship items back to me within: 7 days of delivery
Request a cancellation within: 24 hours of purchase
I don't accept exchanges
But please contact me if you have any problems with your order.
The following items can't be returned or exchanged
Because of the nature of these items, unless they arrive damaged or defective, I can't accept returns for:
- Custom or personalized orders
- Digital downloads
Conditions of return
Buyers are responsible for return shipping costs. If the item is not returned in its original condition, the buyer is responsible for any loss in value.
Sep 27, 2020
Awesome print! Excellent quality, easy install. Thanks man!
Sep 26, 2020
Sep 25, 2020
the item was very well designed and built. i would definitely recommend this grip to anybody with a nerf rival takedown.
Jul 13, 2020
Jul 8, 2020
Very smooth and high quality 3D print. My only criticism is that some of the channel where the trigger slides wasn't completely cleaned out after printing, so it took a bit of careful effort with my Dremel to ream it out. I can't fault the part enough just based on that to give less than five stars tho.